Compressors

Air CompressorsCRC-Evans Air Compressors are designed to complement CRC-Evans pneumatic equipment.

The working range of the compressors is 200-225 psi (13.6-15.3 atm). This assures that the CRC-Evans working equipment has an adequate compressed air supply with a minimum range of 180-200 psi (12.2-13.6 atm).

Each compressor is equipped with a specified power unit: 

  • HTD - Diesel engine with electric start
  • HTE - Electric motor, supplied to the customer's required voltage; switch gear is an extra cost option

    Compressors are available in gasoline-, diesel-, or electric-powered models.The unit is foot-mounted and comes complete and ready to operate. 

    Additional Factory-Fitted Options
    • Roll-over cage.
    • Air tank certified to your country's standards
    • Centerlift hook
    • Switch gear for electric motor
    • Moisture-proof electrical enclosures
    • Automatic drain valve
    • Cold start equipment for diesel engines only
    • De-icer (for product air); standard is 32°F (0°C)
    • Output valve manifold
    • Skid mount
    • Pipe Bending Machine mounting bracket

    Note: Compressors may be purchased without the air tank.

    Specifications

     

    Model

    Engine

    HP

    Length
    in./mm

    Width
    in./mm

    Height
    in./mm

    Weight
    lb./kg

    Free Air
    cfm(I/m)

    Receiver Size
    gal./l

    HTE 325

    Electric

    7.5

    54/1372

    22/559

    50/1270

    760/348

    16.7/473

    80/303

    HTD 340

    Diesel

    15

    69/1753

    23/584

    56/1422

    1230/558

    29.2/827

    80/303

    HTE 340

    Electric

    10

    69/1753

    23/584

    56/1422

    1170/531

    29.2/827

    80/303

    HTD 390

    Diesel

    23

    83/2108

    35/889

    75/1905

    2780/1261

    66/1869

    120/454

    HTE 390

    Electric

    20

    83/2108

    35/889

    75/1905

    2720/1234

    66/1869

    120/454

     

    Dimensions and weights provided for reference only. Dimensions and weights can vary depending upon final configuration of the equipment. Please contact CRC-Evans to confirm final weights and dimensions prior to shipment. 

    • All power unit ratings are "continuous horsepower @ 2,000 RPM"
    • Advised capability: HTE 325: Non-self-propelled clamps up to 20" (508mm)
    • HT 340E&D: All self-propelled clamps and mandrels up to 30" (762mm) pipe
    • HT 390E7D: All self-propelled clamps and mandrels over 30" (762mm) pipe
    • HTE and HTD models have identical output within the size range
    • The HTE 325 is not available with a diesel engine; use the HTD 340 if a diesel engine is required