Superscreen Vulcano 2.0

The NEW Superscreen Vulcano 2.0 is the latest version of the famous unmatched padding machine, updated and improved to excel on the most demanding worksites. The Vulcano 2.0 delivers screening and padding with the reliability you expect from a Laurini machine.

A vibrating screen machine setup on a tracked self-propelled undercarriage with remote control, the Vulcano 2.0 is equipped with a NEW inclined feeder for ease of loading, resulting in faster excavator cycles and increased productivity. A NEW hydraulic system delivers quick steering response and precise movement control, in combination with an over-dimensioned heat exchanger/radiator with FanDrive system that provides efficient and modulate cooling to the vehicle heat exchanger, resulting in a fuel consumption decrease of up to 20%.

A NEW engine enclosure design with hinged doors provides easy access to all components, granting better protection against dust and dirt to engine and hydraulic parts. A NEW side-to-side retractable conveyor belt is speed-adjustable and is equipped with an hydraulic head deflector. These features allow the operator to adjust the padding material flow and its direction into the trench.

Highly reliable, the Vulcano 2.0 is a versatile machine fit for any sort of soil and suitable for a variety of right-of-way conditions.

 

Technical Data

TECHNICAL FEATURES
Lateral Length of Conveyor (fully extended) 3.5m
Maximum Operation Slope 40%
Maximum Operation Lateral Slope 5%

 

ENGINE
Type CATERPILLAR
Model C6.6 ACERT
Net Flywheel Power (DIN 6270) 225 bHp
Governed Speed 2200 RPM
Displacement 6.6 L
Emission MEETS TIER 3, STAGE IIIA EMISSION REQUIREMENTS. TIER REFERS TO EPA (U.S.) STANDARDS. STAGE IIIA REFERS TO EUROPEAN STANDARDS – FLEXIBILITY PROGRAM.
Engine enclosure design with hinged doors for ease of service.

 

HYDRAULIC SYSTEM
Main Pumps 2 INDEPENDENT HYDROSTATIC VARIABLE PUMPS TRAVEL
Maximum Capacity 2 x 300 L/min
Maximum Operating Pressure 330 Bar – 1 HYDROSTATIC VARIABLE PUMP ELEVATOR
Maximum Capacity 215 L/min
Maximum Operating Pressure 350 Bar
Gear type pumps for general service.

 

TRANSMISSION
Type HYDROSTATIC
Motors 2 MOTORS WITH AXIAL PISTONS SELF-CONTAINED INTO THE TRACK FRAMES
Brakers INTEGRATED NEGATIVE CONTROL
Final Drives EPICYCLOIDAL OIL SOAKED
Maximum Speed 1st – LOW 0 – 2 km/h
2nd – HIGH 0 – 5 km/h

 

CONTROLS
Type PILOT-OPERATED FOR OPERATOR ON THE GROUND
Safety EMERGENCY SHUT-OFF BUTTON ON EACH SIDE
Control REMOTE CONTROL
Remote Type Control AUTEC

 

FEEDER
Type HYDRAULIC DRIVE, OPERATOR-CONTROLLED, VARIABLE SPEED, INCLINED FOR EASE OF LOADING
Vertical Adjustment MINUS 300 mm to PLUS 300mm
Chain Adjusters MANUAL
Shoe Width (Reversible Double Chain Feeder with Shoes) 1300mm

 

FLUID CAPACITIES
Fuel Tank 540 L
Hydraulic System Circuit 600 L

 

SCREEN-HIGH FREQUENCY
Interchangeable Screen Mesh 5 to 100mm
Width 1.83m
Length 3.20m
Area 5.80m2
Number of Decks 1
Maximum Capacity 350 ton/h
Maximum Feed Size 600mm
Transmission HYDRAULIC
Hydraulic Motor 1 GEAR TYPE
Shaft Bearing 2x ROLLER TYPE SFK22330
CCJA/W33 VA405 (outer diam. 320mm)

 

CONVEYOR BELT
Bilateral Hydraulic Extension Slide
Type RUBBER
Width 800mm
Length 6400mm
Variable Speed 0 – 180m/min
Rotation Capability REVERSIBLE
Transmission HYDRAULIC ADJUSTABLE SPEED
Hydraulic Motors 2 ORBITAL TYPE