b'P-600Z Computerized Welding MachineAdditional FeaturesTip-to-Work Tracking maintains the torch at a constant stick-out distance. Horizontal Tracking maintains thecenter of the joint. Thirty-two programmable welding passes per torch Enforced limits on programmable welding parameters (motor speeds, oscillation width, etc.) Secure smart card limits unauthorized access to programmable welding parameters Data logging is made easy with the smart card, laptop and Excel interface software supplied by CRC-Evans Position-Based Welding allows real-time weld parameter changes via the tilt sensor No trim pots or jumper settings on any hardware component Feedback from optical encoders on digital motors removes the need for motor calibration Adjustable arc trim for pulse welding helps control heat input Removable elastometric keyboard is easy to replace after prolonged use of the handheld unit Onboard touch screen display shows critical weld parameters (Travel Speed, Wire Feed Speed, Tilt Angle,Oscillation Width and Frequency, Volts, Amps, and Pass Name) as well as user-friendly diagnostic information Easy-to-use graphical interface program allows upload and download of welding parameters via laptop ordesktop computer Onboard menu system allows weld parameters to be modified from the touch screen using the secure smart card System can be configured to perform a single pass on multi-station jobs or perform all passes on a singlestation Microprocessor-based PID loop control is available for controlling constant-voltage welding power supplies in short arc applications Independent modular power driver stages for all motors assist in easy troubleshooting Programmable potentiometer can be set to control wire feed speed or travel speed Programmable start and stop positions for the welding torchSpecial Features and ApplicationsDesignTotally modular design. Two autonomous weldingtorches.Use Fewer ConsumablesThe P-600 system utilizes two water cooled torchesfor prolonged tip life and precise wire feed controlfor tracking.Conformance TestingCE European CertificationThe CRC Evans External Welder (P-600) was testedto EN 55011, Group 1 Class A and was found to bein compliance with the required criteria.! DisclaimerAlthoughgreatcarehasbeentakenincompilingtheinformationcontainedinthiscatalogue,CRC-Evansdoesnotacceptresponsibility for the consequences of any errors, nor for the effects of any subsequent changes made by the various sources of data.Dimensions and weights provided for reference only. Dimensions, specifications and weights can vary depending upon final66 configuration of the equipment. Please contact CRC-Evans to confirm final weights and dimensions prior to shipment.'